Please note: we are not taking orders until February 2017.
Solar Road Markers
Solar Crystal Road Stud (Battery)
Key features
- Crystal design with transparent expoxy glue
- Thin design with only 20mm above the ground
- Six or twelve 08mm LED offers visual warning light
- cycle path, bridges, concrete traffic barriers, walk/pathways, coastal walks, boom gates, trucking docks, mining applications, pedestrian crossings, traffic islands, marine wharfs, boats/ferries, cranes, and anywhere there is a need to mark/light in areas with little or no access to electrics.
Technical SPecification
- Size: 100*100*20mm; Net weight: 260g
- Power supply: Mono crystalline panel
- Power storage device: heat-resistant Li Battery
- Lighting mode: flashing or steady
- LED: 8mm, one-way 6pcs, two-wat 12pcs
- Color range: yellow, red, white, blue, green
- Working time: over 48 hours after fully charged
- Visual distance: >1000m
- Temprature rating: -20C to +70C
- Starting intensity: 500Lux
- Material: PC shell with transparent epoxy filler
- Compression resistance: over 10ton
- Water proofing: IP68
Solar Flex Alu
Key features
- Special flexible solar cell can withstand most heavy impacts from tires.
- Special flexible solar cell never cracked after heavy impact. The weight resistance is over 20ton.
- The reflextive lenses are inserted from the internal side which are well protected by the aluminium shell.
- Aluminium shell and thick top PC cover supports heavier impact.
- Large size surface disperse the impact from traffic.
- Full sealed with epoxy, waterproof, IP68.
Technical SPecification
- Size: 125*105*25mm; Net weight: 400g
- Power supply: flexible solar panel (Mono crystalline)
- Power storage device: heat-resistant Li Battery
- Lighting mode: flashing or steady
- LED: 5mm, one way 2 or 3pcs, two way 4 or 6 pcs
-
Color range: amber, red, white, green, blue
- Working time: over 72 hours after fully charged
- Visual distance: >500m
- Temprature rating: -20C to +70C
- Starting intensity: 500Lux
- Material: Aluminium shell with epoxy filler
- Compression resistance: over 20ton
- Water proofing: IP68
Solar Road Markers are a low-cost, self-contained, solar-rechargeable, LED illuminated marker. They can be used to reduce speed, signal driver attention to common features, hazards, and dangerous bends on our roads. Solar Road Markers are not to be used as a replacement of Retroflective Raised Pavement Markers (RRPM) but as a new high-tech alerting device.
Solar Road Markers can be used on sharp corners, dangerous bends, pedestrian crossings/refuges, concrete traffic islands, median/dividing strips, bike lanes, speed humps, merging lanes, roundabouts, guard rails, narrow bridges ‘KEEP CLEAR’ intersections, and more.
- Solar Road Markers provide a significant increase in the effective warning distance for drivers. Flashing models ‘flag’ driver attention and can help reduce speed.
- Help reduce pedestrian and vehicle accidents caused by poor weather conditions such as rain or fog which can make road lines and other road safety features almost invisible at night.
- Solar Road Markers are visible up to a kilometer away, therefore helping drivers adjust to a safe speed and reduce the possibility of accidents.
- Solar Road Markers could help reduce driver fatigue caused by the perception of long, dull, dark roads at night.
- Quick and easy to install (no hard wiring) using bitumen epoxy, tamper-proof concrete anchors or both with virtually no maintenance and powered free from the sun!
Solar Road Markers come in a variety of shapes and sizes and are available in Amber, Red, White, Blue, and Green. Light mode can be flashing or constant.
Provides clear and visible traffic guidance in all weather conditions! Fog and heavy rain – wet roads which creates a reflection of city and vehicles lights and makes current lane lines almost invisible!
Studs on a country road
Click here to see video of Solar Road Markers